APPLICATION-BASED RESIN SOLUTIONS

Application-Based Epoxy Resin Solutions

Explore epoxy resin solutions by application, including doming resin, crystal clear casting epoxy, river table epoxy and clear decorative epoxy topcoat. Start with what you manufacture, then match the resin system for sample testing.

Explore Solutions

HOW TO CHOOSE

Start With Your Application

You do not need to know whether you need 1:1, 2:1 or 3:1 epoxy before contacting us. Tell us your product, substrate, production method and performance target.

  1. 01WHAT YOU MAKE

    Product or application

  2. 02HOW YOU PRODUCE

    Manual or dispensing equipment

  3. 03WHAT PERFORMANCE YOU NEED

    Clarity, flexibility, UV resistance or protection

  4. 04MATCH THE RESIN SYSTEM

    Sample test and production evaluation

CORE SOLUTIONS

Core Resin Solutions for Industrial Production

Clear deep-pour epoxy resin used in a wood river table and large transparent casting application

RIVER TABLE & DEEP-POUR EPOXY

2:1 Epoxy Resin for River Tables and Large Transparent Pours

402AB hard river table epoxy resin for wood-resin furniture, cracks, void filling and large transparent casting where working time and heat management must be evaluated carefully.

Typical Applications

  • River Tables
  • Wood Casting
  • Wood Cracks and Voids
  • Large Transparent Castings
  • Large-Volume Pouring
  • Wood-Resin Furniture

Common Production Requirements

  • Controlled working time
  • Heat management
  • Clear deep casting
  • Wood compatibility testing
  • Batch-size planning
  • Room-temperature curing evaluation

Recommended System

402AB 2:1 River Table Epoxy

At approximately 25 degrees C, a batch of up to 15 kg is generally recommended for a 3-4 cm pour. Actual safe pour depth depends on batch size, mold geometry, ambient temperature and heat dissipation.

Explore River Table Epoxy
Crystal clear epoxy resin for jewelry, flower specimens and small decorative mold production

DIY & SMALL RESIN CRAFTS

Clear Epoxy Resin for Small Mold and Craft Production

Clear epoxy resin systems for jewelry, flower specimens, decorative molded products, resin accessories and repeat small-item production.

Typical Applications

  • Jewelry
  • Flower Specimens
  • Decorative Molded Products
  • Resin Accessories
  • Small Mold Production
  • Batch Craft Production

Common Production Requirements

  • Easy mixing
  • Clear cured appearance
  • Faster cure options
  • Bubble control
  • Small-batch repeatability
  • Export packaging options

Recommended System

1:1 Crystal Clear Epoxy Resin

1:1 is the main export ratio for easier mixing and faster curing. A 3:1 higher-hardness option is also available. Approx. 150 g mixed resin may be evaluated for small mold pours within about 5 cm, subject to mold geometry, ambient temperature and testing.

Explore Craft Epoxy Solutions
Clear resin doming applications including raised labels, 3D stickers, badges and dimensional emblems

DOMING RESIN SOLUTIONS

Domed Labels, 3D Stickers and Dimensional Surface Doming

Clear epoxy doming resin systems for label, sticker, rigid badge, nameplate and relief-product manufacturers requiring smooth self-leveling domes, high transparency and controlled cured hardness.

Typical Applications

  • Domed Labels
  • 3D Stickers
  • Rigid Badges
  • Emblems
  • Nameplates
  • Dimensional Branding Products

Common Production Problems

  • Air bubbles after dispensing
  • Resin flowing over label edges
  • Uneven doming surfaces
  • Yellowing during use
  • Incorrect cured hardness
  • Unstable curing

Resin Options

3:1 Epoxy Doming Resin
Medium-soft clear epoxy formula for cost-effective indoor doming.
2:1 Epoxy Doming Resin
Hard clear epoxy formula for rigid badges, nameplates and dimensional surfaces.
Explore Doming Resin Solutions
Clear epoxy topcoat covering a decorative 3D or metallic floor surface

3D DECORATIVE EPOXY FLOORING

Clear Decorative Epoxy Topcoat for 3D and Metallic Floor Effects

7001AB 2:1 clear decorative epoxy floor topcoat for transparent covering over 3D floor graphics, metallic effects and high-gloss decorative floor surfaces.

Typical Applications

  • 3D Floor Graphics
  • Metallic Decorative Flooring
  • High-Gloss Decorative Surfaces
  • Transparent Decorative Covering
  • Selected Underlying Layers
  • Project-Based Decorative Evaluation

Common Production Requirements

  • Clear decorative finish
  • 2:1 weight-ratio mixing
  • Approx. 40-minute usable time at 25 degrees C
  • Approx. 7-8 hour initial cure
  • Approx. 72 hour complete cure
  • Approx. 0.8-1.2 kg per square meter

Recommended System

2:1 Decorative Epoxy Topcoat

Designed primarily for decorative floor appearance. Approx. 1 kg per square meter creates about 2-2.5 mm thickness, depending on project conditions and testing.

Explore Decorative Flooring Epoxy

RESIN COMPARISON

Compare Resin Systems by Production Requirement

Use this overview as a starting point. Final resin selection should be confirmed through application and production testing.

Resin System Primary Use Cured Character Application Positioning Mix Ratio
Epoxy Doming ResinIndoor labels & stickersMedium-soft or hardCost-effective indoor doming3:1 / 2:1
Crystal Clear Craft EpoxyJewelry and small moldsClear cured castingMain export craft system1:1 (3:1 option)
River Table EpoxyRiver tables and deep poursHard clear castingControlled large-volume pouring2:1
Decorative Flooring EpoxyDecorative floor topcoatClear high-gloss finishDecorative appearance topcoat2:1
Industrial laboratory resin formulation and sample testing for application-specific epoxy and polyurethane requirements

CUSTOM FORMULATION

When a Standard Resin Does Not Fit Your Production

Resin selection does not always end with an existing product code. Depending on the application, selected formulations may be adjusted around viscosity, cure speed, cured hardness, flexibility and production packaging requirements.

  • Viscosity
  • Cure Speed
  • Hardness
  • Flexibility
  • Mix Ratio & Packaging
Discuss a Custom Resin Requirement

DISTRIBUTOR & PRIVATE LABEL

Build a Resin Product Range for Your Local Market

We support distributors, importers and product brands with application-based product matching, private-label packaging and repeat bulk supply planning.

  1. PRODUCT RANGE MATCHING

    Compare dispensing, casting, potting, bonding, and PU resin systems based on application, target market, and target package dimensions.

  2. PRIVATE LABEL & PACKAGING

    Discuss product labels, package sizes, cartons and presentation requirements for your local market.

  3. REPEAT BULK SUPPLY

    Coordinate sample evaluation, initial orders and repeat purchasing requirements for long-term supply.

Discuss Distribution View Product Range
HSFECL epoxy and polyurethane resin packaging range for distributor, private-label and bulk supply programs

RESIN RECOMMENDATION

Tell Us Your Application and Production Requirement

Share your product, production method and current resin requirement. We will use the information as a starting point for resin system matching and sample evaluation.