Clear Cured Appearance
Supports transparent decorative results when formula, mixing and curing conditions are controlled.
1:1 CLEAR CRAFT EPOXY - B2B SUPPLY
1:1 Crystal Clear Epoxy Resin for Small Molds and Decorative Crafts
Clear two-component epoxy resin for jewelry, flower specimens, keychains, resin accessories and repeat small-mold production. The 1:1 formula is the primary export option, with an additional 3:1 higher-hardness direction available for selected requirements.
Need help choosing between 1:1 and 3:1? Explore Small Resin Craft Solutions
- Primary 1:1 Export Formula
- Clear Small-Mold Casting
- Bulk & Private-Label Supply
- Sample Evaluation
Quick Product Facts
- Mix Ratio
- 1:1 main export formula
- Formula Alternative
- Selected 3:1 higher-hardness option
- Primary Application
- Small molds and decorative products
- Curing Positioning
- 1:1 cures relatively faster than the 3:1 option
- Reference Batch Guidance
- Approximately 150 g for selected small-mold testing
- Supply Options
- Samples, bulk packaging and private label
PRODUCT PERFORMANCE
Designed for Clear Repeat Small-Mold Production
High-Gloss Decorative Finish
Suitable for small molded items where a clean glossy appearance matters.
Easy 1:1 Formula Direction
The primary export direction is easier for international buyers to evaluate.
Small-Mold Application Range
Jewelry, specimens, keychains, accessories and small decorative molds can be evaluated.
Formula Hardness Options
A selected 3:1 direction may be discussed when a harder cured result is needed.
Bulk and Private-Label Availability
Supports sample evaluation, bulk purchasing and private-label packaging discussions.
FORMULA COMPARISON
Compare the Current Craft Epoxy Formula Directions
| Formula Direction | Primary Positioning | Curing Positioning | Cured Result | Typical Evaluation |
|---|---|---|---|---|
| 1:1 Crystal Clear Epoxy | Main export option | Relatively faster | Clear cured product for small molded applications | Jewelry, flower specimens, keychains, accessories and decorative molds |
| 3:1 Higher-Hardness Epoxy | Additional formula option | Relatively slower than the 1:1 option | Higher cured hardness | Selected rigid small molded and decorative products |
Final formula selection should be confirmed using the actual mold, mixed amount, target thickness and production conditions.
TECHNICAL DATA
Crystal Clear Craft Epoxy Product Overview
| Product Type | Two-component clear epoxy casting resin |
|---|---|
| Product Model | 3566-2AB |
| Primary Formula | 1:1 Crystal Clear Epoxy Resin |
| Mix Ratio | A:B = 100:100 by volume |
| Viscosity Reference | Part A: 1500-2000 mPa.s; Part B: 300-500 mPa.s |
| Primary Use | Small molds, flower specimens, jewelry, keychains, resin accessories and decorative products |
| Appearance Positioning | Clear cured appearance |
| Curing Reference | With 100 g mixed resin, room-temperature surface dry is approximately 1-2 hours and hardness develops after approximately 24 hours; heat curing reference is 60°C x 120 minutes. |
| Cured Hardness | Shore D > 75 |
| Reference Small Batch | Approximately 150 g for selected small-mold testing |
| Reference Pour Guidance | Within about 5 cm under suitable small-mold conditions and testing |
| Supply | Samples, bulk packaging and private label |
| Storage Guidance | Store sealed, protected from light at 25°C and relative humidity below 70%. Close the Part B package tightly after use to reduce moisture absorption. |
Reference values are from the supplied 3566-2AB product document. Actual working behavior, curing speed and finished performance depend on resin temperature, mixed amount, mold geometry and production conditions.
Cannot find the cured result, working window or handling performance you need? Selected craft epoxy performance adjustments may be discussed after reviewing your mold, target product and order plan.
Discuss a Custom Craft Epoxy FormulaAPPLICATION EXAMPLES
Typical Small-Mold and Decorative Applications
Use this product direction for commercial small-mold and decorative product manufacturing after sample testing with the real mold material and production process.
- Jewelry
- Flower Specimens
- Keychains
- Letter Molds
- Resin Accessories
- Miniature Ornaments
- Decorative Blocks
- Repeat Small-Item Production
SMALL MOLD GUIDANCE
Confirm Mixed Quantity and Mold Geometry Before Casting
Curing behavior and heat buildup depend on the mixed amount, mold shape, casting thickness, ambient temperature and heat dissipation.
Reference for selected small molds
For selected small-mold applications, approximately 150 g of mixed resin may be evaluated for pours within about 5 cm, subject to mold geometry, ambient temperature and production testing.
Mixed Resin Amount
Higher mixed volume can increase heat buildup and change curing behavior.
Mold Cross-Section
Deep, narrow or enclosed molds may retain heat differently.
Target Thickness
Casting thickness should be tested with the actual product design.
Ambient Temperature
Temperature affects viscosity, working behavior and curing speed.
This Craft Epoxy product is not intended as a substitute for dedicated river-table or large-volume deep-pour epoxy.
View River Table & Deep-Pour EpoxySTANDARD OPERATION
General Mixing and Small-Mold Casting Process
- 01
Confirm the Formula and Mix Ratio
Select the 1:1 product or discuss the 3:1 higher-hardness direction before testing.
- 02
Accurately Measure Part A and Part B
Follow the corresponding product TDS for the exact formula-specific method.
- 03
Mix Thoroughly Until Uniform
Avoid contamination and confirm the mixing process under real production conditions.
- 04
Pour Into the Prepared Small Mold
Use the actual mold geometry, mixed amount and target thickness for validation.
- 05
Allow Air Release and Surface Leveling
Bubble release depends on formula, mixing, mold shape and curing environment.
- 06
Cure Under Controlled Conditions
Ambient temperature and resin mass affect the final casting result.
Exact mixing method, working time and curing conditions vary by formula. Follow the corresponding TDS and confirm performance with the actual mold and production process.
PACKAGING & B2B SUPPLY
Samples, Bulk Packaging and Private Label Support
HSFECL supports international B2B buyers requiring sample evaluation, bulk purchasing, private-label packaging and repeat product supply.
Packaging and order arrangements depend on the selected formula, estimated quantity and target market.
Request Packaging and Product Information- 01Sample Evaluation
Test the resin in your actual mold and production environment.
- 02Bulk Packaging
Packaging can be discussed after formula and quantity confirmation.
- 03Private Label Packaging
Suitable for distributors and product brands with repeat supply needs.
- 04Package Size Matching
Package direction depends on product family, market and target customer.
- 05Repeat Supply Planning
Coordinate product selection and order planning for B2B purchasing.
- 06Technical Data Support
Request the matching product TDS before production use.
PRODUCT NOTES
Production Conditions Affect the Final Casting Result
- Use the correct formula-specific mix ratio.
- Keep Part A and Part B free from contamination.
- Ambient temperature affects viscosity and curing.
- Mixed amount and mold geometry affect heat buildup.
- Test the actual mold material and release process.
- Follow the corresponding formula TDS before mass production.
PRODUCT FAQ
Crystal Clear Craft Epoxy Questions
Why is 1:1 the primary export formula?
The 1:1 direction is easier for international buyers to evaluate and is positioned as the primary export option for clear small-mold production.
What is the difference between the 1:1 and 3:1 craft epoxy?
The 1:1 product is the main export option and cures relatively faster than the 3:1 option. A selected 3:1 direction may be evaluated when higher cured hardness is required.
Can this resin be used for flower specimens?
Yes, flower specimen applications can be evaluated with the actual mold, mixed amount and curing conditions before repeat production.
Can it be used for keychains and letter molds?
Yes, keychains, letter molds and resin accessories are within the typical small-mold application range after sample testing.
Can I pour 5 cm in one application?
Do not treat 5 cm as a universal maximum. Approximately 150 g may be evaluated for pours within about 5 cm under suitable small-mold conditions, subject to mold geometry, temperature and testing.
Is this resin suitable for river tables?
No. This product is for small molds and decorative products, not river tables or large-volume deep pouring.
Can I request samples before bulk ordering?
Yes. Share your application, estimated quantity and formula direction so the appropriate sample can be discussed.
Do you support private-label packaging?
Private-label packaging may be discussed based on the selected formula, target market, estimated quantity and repeat supply plan.
Do you provide small retail DIY kits?
HSFECL primarily supports B2B samples, bulk purchasing, distributors and private-label product requirements. Packaging availability should be confirmed with the sales team.
PRODUCT SAMPLE & B2B SUPPLY
Tell Us Your Crystal Clear Craft Epoxy Requirement
Share your small-mold application, purchasing quantity and packaging requirement. If you selected a formula direction, that context will be included automatically.
Request Resin Recommendation
OTHER PRODUCT FAMILIES
Explore More HSFECL Resin Systems
Review adjacent resin products for dimensional doming, large transparent castings and decorative clear floor topcoat applications.
Epoxy Doming Resin
Clear epoxy doming formulas for indoor labels, 3D stickers, badges and dimensional products.
River Table & Deep-Pour Epoxy
Dedicated deep-pour epoxy direction for wood slabs, resin furniture and larger transparent castings.
Decorative Flooring Epoxy
Clear decorative epoxy topcoat for 3D graphics, metallic effects and high-gloss floor art.