Primary product positioning.
7001AB DECORATIVE EPOXY TOPCOAT - B2B SUPPLY
Clear Epoxy Topcoat for 3D and Metallic Decorative Flooring
Clear 2:1 epoxy topcoat for covering 3D floor graphics, metallic effects and decorative high-gloss surfaces. The product is designed primarily for decorative appearance and should not be specified as a heavy-duty abrasion-resistant floor coating.
Need help reviewing the complete decorative floor application? Explore Decorative Flooring Solutions
- 2:1 Weight Ratio
- Clear Decorative Topcoat
- Approximately 0.8-1.2 kg/m2
- Bulk & Private-Label Supply
Quick Product Facts
- Product Model
- 7001AB
- Mix Ratio
- 2:1 by weight
- Product Type
- Clear decorative epoxy topcoat
- Reference Usage
- Approximately 0.8-1.2 kg/m2
- Reference Thickness
- Approximately 1 kg/m2 creates about 2-2.5 mm
- Complete Cure
- Approximately 72 hours
Designed for decorative appearance rather than heavy-duty abrasion resistance.
PRODUCT POSITIONING
Clear Decorative Topcoat for Visual Floor Effects
7001AB is primarily designed as the transparent finishing layer over 3D floor graphics, metallic effects and selected artistic floor surfaces requiring clarity, leveling and gloss.
Decorative Appearance First
Use this product for visual clarity, transparent coverage and gloss, not as the only protective layer for heavy-wear floors.
- Clear Transparent Coverage
- Decorative High-Gloss Appearance
- 2:1 Weight Ratio
- 3D and Metallic Floor Applications
- Approximately 40-Minute Working-Time Reference
- Bulk and Private-Label Supply
TECHNICAL DATA
Product Technical Overview
| Product Model | 7001AB |
|---|---|
| Product Type | Two-component clear decorative epoxy floor topcoat |
| Mix Ratio | 2:1 by weight |
| Primary Application | Transparent covering over 3D graphics, metallic effects and decorative floor surfaces |
| Working Time | Approximately 40 minutes at 25 C |
| Initial Cure | Approximately 7-8 hours at room temperature |
| Complete Cure | Approximately 72 hours |
| Reference Usage | Approximately 0.8-1.2 kg/m2 |
| Reference Thickness | Approximately 1 kg/m2 creates about 2-2.5 mm |
| Primary Layer Positioning | Decorative clear topcoat |
| Wear Positioning | Not intended as a scratch-resistant or abrasion-resistant heavy-duty coating |
Actual coverage, thickness, working time and curing behavior depend on substrate condition, material temperature, application loss, layer design and construction method.
APPLICATION EXAMPLES
Typical Decorative Flooring Applications
Use the clear topcoat over evaluated decorative floor layers where transparent coverage, gloss and visual effect are the commercial priority.
- 3D Floor Graphics
- Metallic Effect Floors
- Embedded Visual Designs
- Decorative Transparent Surfaces
- Showroom Feature Floors
- Selected Low-Wear Interior Floors
- Artistic Floor Displays
- Custom Decorative Surface Projects
LAYER POSITIONING
Primarily Used as the Decorative Clear Topcoat
- 01Decorative Base or Graphic
Printed image, metallic effect or prepared artistic surface.
- 02Clear Decorative Topcoat
7001AB provides transparent coverage, leveling, gloss and the visible final surface.
- 03Optional Additional Wear Protection
Projects requiring stronger scratch or abrasion resistance may require a separately evaluated compatible protective system.
Depending on project design and cost requirements, 7001AB may also be evaluated for selected underlying or intermediate decorative layers after testing. It should not be presented as a complete primer, intermediate and topcoat system.
MATERIAL USAGE
Reference Coverage and Applied Thickness
Use this estimate only as a purchasing reference before sample testing and project confirmation.
- Reference Usage
- Approximately 0.8-1.2 kg/m2
- Reference Thickness
- Approximately 1 kg/m2 creates about 2-2.5 mm
The estimate does not include substrate absorption, unevenness, application loss, mixing loss, edge loss or additional decorative layers. It is not an exact guaranteed order quantity.
Request Coverage ReviewIMPORTANT PRODUCT LIMITATIONS
Decorative Gloss Is Not Heavy-Duty Wear Protection
This product is positioned for decorative appearance. Wear protection requirements must be evaluated separately before project specification.
Suitable for selected 3D and metallic decorative effects.
Not a primary product performance claim.
Not a primary product performance claim.
Do not specify 7001AB as the only protective layer for high-traffic, heavy-wear, warehouse or industrial flooring applications.
A different complete flooring design or compatible protective layer may be required and must be confirmed separately.
STANDARD OPERATION
General Mixing and Decorative Topcoat Application
- 01
Confirm the Floor Design and Intended Layer
Confirm whether the clear resin is being evaluated as the visible decorative topcoat.
- 02
Prepare a Dry, Clean and Level Surface
Evaluate the actual surface and decorative layer before application.
- 03
Accurately Weigh Part A and Part B at 2:1
Use the 2:1 weight ratio and follow the current approved TDS.
- 04
Mix Thoroughly Until Uniform
Avoid contamination and confirm the mixing process under real conditions.
- 05
Apply at the Planned Usage Level
Use the planned coverage and thickness as a tested project reference.
- 06
Allow Curing Under Controlled Conditions
Curing depends on substrate, layer system and project environment.
Exact application method, working time, thickness and curing conditions depend on the substrate, layer system and project environment. Follow the approved 7001AB TDS and confirm through project testing.
PROJECT CONDITIONS
Substrate and Decorative Layer Compatibility Affect the Result
Final clarity, leveling, adhesion and curing performance depend on the existing surface, decorative layer compatibility, mixing accuracy and construction conditions.
- Dry and Clean Surface
- Level Substrate
- Compatible Graphic or Metallic Layer
- Accurate 2:1 Weight Ratio
- Clean Curing Environment
PACKAGING & B2B SUPPLY
Samples, Bulk Packaging and Private Label Support
HSFECL supports decorative-flooring contractors, importers, distributors and product brands requiring sample evaluation, bulk purchasing, packaging matching and repeat supply.
Packaging and order arrangements depend on the target market, estimated quantity and purchasing requirement.
Request 7001AB Packaging and Quotation Information- 01Product Sample Evaluation
Test the resin with the actual substrate, graphic layer and project conditions.
- 02Bulk Packaging
Bulk packaging direction can be discussed after quantity and market confirmation.
- 03Private Label Packaging
Support can be reviewed for distributors and product brands with repeat needs.
- 04Package Size Matching
Package size depends on the buyer's channel, volume and purchasing plan.
- 05Repeat Supply Planning
Coordinate product selection and repeat purchasing requirements.
- 06Technical Data Support
Request the current approved 7001AB TDS before production use.
PRODUCT NOTES
Application Conditions Affect the Final Surface
- Keep Part A and Part B sealed before use.
- Avoid moisture and cross-contamination.
- Maintain the correct 2:1 weight ratio.
- Temperature affects viscosity and curing behavior.
- Surface unevenness affects material usage.
- Test the actual decorative layer and substrate before mass application.
- Follow the current approved 7001AB TDS.
PRODUCT FAQ
Decorative Flooring Epoxy Questions
What is the mix ratio for 7001AB?
7001AB uses a 2:1 mix ratio by weight.
Is 7001AB primarily a topcoat?
Yes. It is primarily positioned as a clear decorative epoxy topcoat.
Can it cover a printed 3D floor graphic?
Yes, transparent covering over 3D floor graphics is a primary application direction after project testing.
Can it be used over metallic flooring effects?
Yes, metallic decorative flooring effects are within the intended decorative application range.
How much material is required per square meter?
Reference usage is approximately 0.8-1.2 kg/m2, depending on layer design and application conditions.
Does 1 kg always create exactly 2-2.5 mm?
No. Approximately 1 kg/m2 creating about 2-2.5 mm is reference guidance. Actual thickness varies with substrate condition, application loss and construction method.
Is 7001AB scratch resistant?
No scratch-resistant claim is made for this product. Projects requiring stronger wear protection may need a separate compatible system.
Is it suitable for warehouses or high-traffic floors?
7001AB is primarily positioned for decorative appearance rather than heavy-duty abrasion resistance.
Can it also be used as an intermediate layer?
Depending on project design and cost requirements, it may be evaluated for selected underlying or intermediate decorative layers after testing.
Can I request samples and technical data?
Yes. Share your floor effect, area, expected wear and purchasing requirement so sample and TDS information can be discussed.
Do you support bulk and private-label packaging?
Bulk and private-label packaging may be discussed based on target market, estimated quantity and repeat supply requirements.
PRODUCT SAMPLE & B2B SUPPLY
Tell Us Your Decorative Flooring Epoxy Requirement
Share your decorative effect, floor area, expected wear and purchasing requirement. If you used the calculator or selected a request above, that context will be included automatically.
7001AB is not positioned as a heavy-duty abrasion-resistant floor coating. High-wear projects may require a different complete flooring design or compatible protective layer.
Request Resin Recommendation
OTHER PRODUCT FAMILIES
Explore More HSFECL Resin Systems
Review adjacent resin products for large transparent casting, small molds and dimensional doming applications.
River Table & Deep-Pour Epoxy
2:1 deep-pour epoxy for wood slabs, furniture casting and large transparent pours.
Crystal Clear Craft Epoxy
1:1 clear epoxy for jewelry, specimens, keychains and repeat small-mold production.
Epoxy Doming Resin
Clear epoxy doming formulas for indoor labels, 3D stickers, badges and dimensional products.