Mixed Resin Volume
Larger batches generally react faster.
402AB DEEP-POUR EPOXY - B2B SUPPLY
River Table and Deep-Pour Epoxy Resin
Clear 2:1 epoxy resin for river tables, wood casting, cracks, void filling and large transparent pours. Reference pouring conditions should be evaluated together with batch size, target thickness, ambient temperature and mold heat dissipation.
Need help reviewing your pour conditions? Check Your Pour Conditions
- 2:1 Weight Ratio
- Approximately 15 kg Batch Guidance
- 3-4 cm Reference Pour at 25 C
- Bulk & Private-Label Supply
Quick Product Facts
- Product Model
- 402AB
- Mix Ratio
- 2:1 by weight
- Primary Application
- River tables and large wood casting
- Reference Batch
- Up to approximately 15 kg
- Reference Pour
- Approximately 3-4 cm at around 25 C and 15 kg
- Complete Cure
- Approximately 24-36 hours at room temperature
Actual pour depth and curing behavior depend on batch size, mold geometry, ambient temperature and heat dissipation.
PRODUCT POSITIONING
2:1 Clear Epoxy for River Tables and Large Transparent Castings
402AB is designed for river-table production, wood-resin furniture, cracks, void filling and selected large transparent casting applications where batch size, pour depth and heat buildup must be controlled.
Controlled Large-Casting Evaluation
Designed to support clear casting and leveling under controlled mixing and production conditions.
- Clear Casting Appearance
- Hard Cured Result
- 2:1 Weight Ratio
- River Table and Wood Casting Applications
- Large-Volume Pouring Positioning
- Bulk and Private-Label Supply
REFERENCE POUR CONDITIONS
Confirmed Production Guidance
- Recommended Single Batch
- Up to approximately 15 kg
- Reference Ambient Temperature
- Approximately 25 C
- Reference Pour Thickness
- Approximately 3-4 cm at around 15 kg
- Complete Cure
- Approximately 24-36 hours at room temperature
- Cold-Weather Guidance
- Lower winter temperatures may extend curing time
- Exotherm Guidance
- Larger mixed volumes react and cure faster and may create greater heat buildup
The 3-4 cm reference applies to approximately 15 kg of mixed resin at around 25 C. Smaller batches may allow greater pour depth, but actual conditions depend on mold dimensions, geometry, insulation, ambient temperature and heat dissipation.
Request Review of My Pour ConditionsTECHNICAL DATA
Product Technical Overview
| Product Model | 402AB |
|---|---|
| Product Type | Two-component clear hard epoxy casting resin |
| Mix Ratio | 2:1 by weight |
| Primary Use | River tables, wood casting, cracks, voids and large transparent pours |
| Recommended Single Batch | Up to approximately 15 kg |
| Reference Pour Thickness | Approximately 3-4 cm at around 15 kg and 25 C |
| Complete Cure | Approximately 24-36 hours at room temperature |
| Cured Hardness | Shore D > 82 |
| Appearance Positioning | Clear transparent casting system |
| Production Method | Manual or mechanical dispensing evaluation |
Actual viscosity, working time, initial cure, density, tensile data and storage information should be confirmed using the current approved 402AB TDS.
APPLICATION EXAMPLES
Typical River Table and Wood Casting Applications
Use 402AB for evaluated large wood-and-resin applications where clear appearance, controlled batch size and heat dissipation planning are important.
- River Tables
- Wood Slab Tables
- Wood Cracks and Voids
- Decorative Furniture Inserts
- Transparent Wood Casting
- Wood-and-Resin Panels
- Large Molded Decorative Objects
- Custom Furniture Components
EXOTHERM & SCALE-UP
Mixed Volume Changes the Reaction Behavior
Epoxy curing generates heat. As mixed resin volume and pour thickness increase, heat may accumulate, reaction may accelerate and available working time may become shorter.
Pour Thickness
Thicker pours retain more heat.
Mold Geometry
Deep, narrow or insulated molds may dissipate heat differently.
Ambient Temperature
Warmer environments may accelerate reaction, while cold conditions may extend curing.
Do not scale a successful small test directly to a full table pour without evaluating the larger batch and mold conditions.
Discuss My Batch Size and MoldPRODUCT BOUNDARY
Dedicated Deep-Pour Epoxy, Not Small-Mold Craft Resin
| Product | Typical Reference Volume | Primary Application | Main Production Consideration |
|---|---|---|---|
| Crystal Clear Craft Epoxy | Approximately 150 g small-mold testing | Jewelry, specimens, keychains and small decorative molds | Small mold geometry and limited mixed volume |
| River Table Epoxy | Up to approximately 15 kg reference guidance | River tables, wood slabs and large transparent castings | Exotherm, pour thickness and heat dissipation |
STANDARD OPERATION
General Mixing and River Table Casting Process
- 01
Confirm Batch Size and Target Pour Thickness
Check whether the planned pour matches the 402AB reference conditions.
- 02
Prepare the Wood and Mold
Confirm the slab, cracks, mold seal and production environment before mixing.
- 03
Accurately Weigh Part A and Part B at 2:1
Use the 2:1 weight ratio and follow the current approved TDS.
- 04
Mix Thoroughly Until Uniform
Avoid contamination and confirm the mixing process under real conditions.
- 05
Pour Under Controlled Conditions
Control temperature, resin mass and mold geometry during the pour.
- 06
Allow Full Curing Before Processing
Allow complete curing before demolding, cutting or further processing.
Exact working time, pouring method and curing conditions depend on material temperature, batch size, mold design and production environment. Follow the approved 402AB TDS and confirm through production testing.
PRODUCTION CONDITIONS
Wood Moisture and Mold Design Affect the Casting Result
Final clarity, adhesion and curing performance depend on wood condition, sealing, mold preparation, mixing accuracy and production environment.
- Dry and Clean Wood
- Stable and Leak-Controlled Mold
- Accurate 2:1 Weight Ratio
- Controlled Mixed Volume
- Dust-Free Curing Environment
PACKAGING & B2B SUPPLY
Samples, Bulk Packaging and Private Label Support
HSFECL supports river-table manufacturers, furniture workshops, distributors and product brands requiring sample evaluation, bulk purchasing, packaging matching and repeat supply.
Packaging and order arrangements depend on the target market, estimated quantity and purchasing requirement.
Request 402AB Packaging and Quotation Information- 01Product Sample Evaluation
Test 402AB with the actual slab, mold and target pour condition.
- 02Bulk Packaging
Bulk packaging direction can be discussed after quantity and market confirmation.
- 03Private Label Packaging
Support can be reviewed for distributors and product brands with repeat needs.
- 04Package Size Matching
Package size depends on the buyer's channel, volume and purchasing plan.
- 05Repeat Supply Planning
Coordinate product selection and repeat purchasing requirements.
- 06Technical Data Support
Request the current approved 402AB TDS before production use.
PRODUCT NOTES
Storage and Temperature Affect Processing
- Keep Part A and Part B sealed before use.
- Avoid moisture and cross-contamination.
- Maintain accurate 2:1 weight measurement.
- Material temperature affects viscosity and reaction speed.
- Larger mixed volumes may shorten available processing time.
- Follow the current approved 402AB TDS before mass production.
PRODUCT FAQ
River Table Epoxy Questions
What is the mix ratio for 402AB?
402AB uses a 2:1 mix ratio by weight.
How much resin is recommended in one batch?
The confirmed reference guidance is up to approximately 15 kg for a single mixed batch.
Can I always pour 4 cm at one time?
No. Approximately 3-4 cm is reference guidance for around 15 kg at approximately 25 C. Actual conditions depend on mold geometry, temperature and heat dissipation.
Can a smaller batch be poured deeper?
Smaller mixed batches may allow greater pour depth, depending on mold geometry, ambient temperature and heat dissipation. Testing is required.
How long does 402AB take to fully cure?
Complete cure is approximately 24-36 hours at room temperature. Lower winter temperatures may extend curing time.
Why does a larger resin batch cure faster?
Epoxy curing generates heat. Larger mixed volumes can accumulate more heat, which may accelerate reaction and curing.
Is 402AB suitable for small jewelry molds?
It is primarily positioned for river tables and large casting. Small decorative molds should generally be evaluated using the dedicated Craft Epoxy range.
Can I use it for cracks and voids in wood?
Yes, wood cracks and void filling are confirmed application directions, subject to wood condition, mold preparation and sample testing.
Can I request a sample and TDS?
Yes. Share your application, estimated quantity and pour conditions so sample and TDS information can be discussed.
Do you support bulk or private-label packaging?
Bulk and private-label packaging may be discussed based on target market, estimated quantity and repeat supply requirements.
PRODUCT SAMPLE & B2B SUPPLY
Tell Us Your River Table Epoxy Requirement
Share your application, estimated quantity and pour conditions. If you selected a product request above, that context will be included automatically.
Request Resin Recommendation
OTHER PRODUCT FAMILIES
Explore More HSFECL Resin Systems
Review adjacent resin products for small molds, decorative floor topcoats and dimensional doming applications.
Crystal Clear Craft Epoxy
1:1 clear epoxy for jewelry, specimens, keychains and repeat small-mold production.
Decorative Flooring Epoxy
Clear decorative epoxy topcoat for 3D graphics, metallic effects and high-gloss floor art.
Epoxy Doming Resin
Clear epoxy doming formulas for indoor labels, 3D stickers, badges and dimensional products.